1989 Blackfin 38 Convertible

Entering the customized and updated salon, to starboard is a custom made settee with rod storage and abundant storage underneath. Across to port is custom made swivel barrel chair with storage drawer under. The settee and chair were custom ordered from a company in Florida that specializes in custom manufacturing of yacht/marine furniture. There is a Vizio 21" Salon TV. The L-Shaped galley is to port and forward and features custom solid surface counter-tops, stainless steel sink, microwave, Princess (2) burner electric/alcohol stove, stainless steel refrigerator with pull-out drawer (new 2023).

Moving forward from the salon and down a few steps is the companionway that features updated wall coverings. The spacious guest stateroom is to port and features criss-cross upper and lower twin berths and excellent storage. Across to starboard is the full private head compartment that features updated wall coverings, marine electric head, vanity with sink & storage, mirrored medicine cabinet and a separate shower compartment with a bench seat.

Moving all the way forward, is the master stateroom that features updated wall coverings, walk-around queen island berth, hanging locker, excellent storage and custom overhead rod/reel racks. (New Mattress and New Under Berth Storage 2023)

In 2023, the salon/galley areas were redesigned and also features custom woodwork, all new custom wood walls, valances and flooring. All other woodwork was refinished and there is a custom fabricated custom engine room access hatch. While moored, with this hatch up, it keeps the engine room cool and helps control the engine room humidity.

The reverse cycle A/C's have all been updated with (3) 16,000 BTU self contained units. A second one was added in the salon with a custom outlet vent. There are also new dim-able LED lights throughout the cabin. Salon windows dark tinted from the inside. Forward in the salon, the wall behind the galley, was custom fared and then was custom wrapped in white carbon fiber look wrap.

• (3) New Simrad 9" Displays (GPS/Map/Chart/Sonar/Engine Gauges) (2018)
• New Garmin 7612 Large Color Multi-Function Display (GPS/Map/Chart/Video-Camera/FLIR/Radar) (2018)
• New Garmin GPS XSV Large Color Multi-Function Display (FLIR Night Vision/GPS/Map/Chart Plotter/Video-Camera)
• New Garmin 4' Open Array 72' Mile Radar (2018)
• New Garmin Auto Pilot (2018)
• New KVH1 TV Satellite System/Dish (2018) (currently not installed)
• New FLIR Thermal Night Vision (2018)
• Standard Horizon Matrix AIS+ GX2150 VHF
• Icom IC-M422 VHF
• New Engine Room Cameras (2018)
• Fusion Bluetooth/Satellite Audio/Stereo Head Unit with Helm & Cockpit Controls
• New Audio Amp with JL Audio Speakers
• Richie Powerdamp Compass

• Custom Aluminum half-tower with New (3) Sided Strataglass Enclosure (2021)
• Custom Aluminum, Railings, Etc.
• Overhead Electronics Box
• Customized/Redesigned Helm
• All New Flybridge Upholstery (2021)
• (2) Helm Chairs
• Port Settee
• Forward Settee (Forward of the Helm)
• Bolster Pads
• Custom Helm Cover
• Forward Half-Tower Mounted Remote Control Spotlight

• Nouveau travail de peinture Awlcraft complet et bandes de pont peintes et bandes de ligne d'eau (2015)
• Rails de levage/spray en fibre de verre sur mesure (pas de tabulations nécessaires pour prendre de la vitesse et augmentation des vitesses de coque)
• Feux LED sous-marins multicolores
• Nouveau travail de fond et PropSpeed sur l'équipement de fonctionnement (fin 2022)
• (8) radeaux de sauvetage d'urgence montés sur canister pour hommes (avant - nouveau 2023)
• Rails de proue en aluminium sur mesure
• (2) supports de pare-battage montés sur rail de proue
• Pulpit de proue en fibre de verre
• Nouvelle ancre électrique sans chaîne avec commandes à la proue et au poste de pilotage (2023)
• Ancre HKG en forme de charrue avec nouvelle chaîne et cordage (2023)
• Pare-battages et cordages

• Custom Built Mezzanine Seating with Cooler/Storage Underneath, Folding Aluminum Foot Rest and (2) Recessed S.S. Cup Holders (2021)
• New Cockpit Cover (not shown - 2024)
• All New Upholstery Cockpit (2021)
• Underwater Multi-Color LED Lights
• Fighting Chair with Cover (not shown)
• Cockpit Bolster Pads
• New Rupp Double Spreader Outriggers (2024)
• Deep Drop Electric Plug Outlets for Electric Reels
• (6) S.S. Recessed Gunnel Top Rod Holders
• (2) Port & (2) Custom Aft Flybridge Wing/Cockpit Aluminum Rocket Launchers/Rod Holders
• (6) Aft Flybridge Railing Mounted Rocket Launchers/Rod Holders
• Teak Cockpit Rocket Launcher with Drawer, Cover, (6) Recessed S.S. Rocket Launchers/Rod Holders & (2) Recessed S.S. Recessed Cup Holders
• Custom Aluminum Flybridge Ladder with new Wide Teak Bottom Steps
• Custom Bait Prep Table with Drawer (Custom Mounted Behind Flybridge Ladder)
• Transom Door w/Gate
• Fresh Water Wash Down System
• Salt Water Wash Down System

• Updated MasterVolt Chargemaster 12/50-3 Battery Charger
• New Phasor K4 (Kubota Engine) 12.5kw Generator with 634 Hours (2018)
• 120 VAC Electrical System
• 12 VDC Electrical System
• (4) Batteries (Mains, Genset & House - New 2023), Plus Extra Battery on Flybridge Dedicated for the Electronics (New 2024)
• Unnecessary Wiring was Removed

• Twin Cummins QSC8.3 600 Recon Diesel Engines with 600hp Each and approximately 600 Hours Since Installed. Local Cummins Dealer advises that they were New engines when they were installed, however Cummins advertises and sales them as Recon Engines, as they are only meant for re-power purposes and not to be sold and installed in brand new boats, as they don't meet the current EPA regulations for new boats. (Installed 2018)
• (2) Cummins/Mercury VesselView4 Engine Displays (new 2018)
• Engine Room Painted and Detailed
• New Seakeeper 6 Gyro (with Gold Warranty and new 2019)
• New (4) Blade ZF Nibral 21 x 26.5 Props (2018)
• Re-manufactured Twin Disc 607A-2 1.5-1 & Converted to E-Shift (2018)
• Glendinning Electronic Engine Controls (new 2018)
• 11 Gallon 120VAC S.S. Water Heater
• Racor Fuel Fuel Filters (mains and genset)
• New 1.75" Prop Shafts with New Tide Shaft Seals & (2) Spare Seals on Each (2018)
• Lazarette was Refitted with New Rudder Table Bearings, New Tide Dripless Rudder Shaft Seals and New Cutlass Bearings (2020)
• MarineAir 16,000 BTU A/C Unit with Reverse Heat
• CruiserAir 16,000 BTU A/C Unit with Reverse Heat
• DometicAir 16,000 BTU A/C Unit with Reverse Heat
• (2) of the A/C's are for the Salon and (1) for Lower Berths/Head
• Bennett Hydraulic Trim Tabs
• Engine Mounts (new 2018)
• (3) Automatic Bilge Pumps (custom mounted extra low to minimize water in the bilge)
• Tank Tenders
• Jabsco 12VDC Fresh Water Pump
• Updated/Recent Galley Maid Delta Head with Electroscan Unit
• (2022) Bronze Sea Strainers and Ball Valves (Updated and Replaced as Needed - With the (2) Main Engines Sea Strainer and Ball Valves Being Replaced with New)
• Electric S.S. Horn
• Automatic Halon 1301 Fire Extinguishing System
• Engine Room Blower
• All Thru-Hull were Serviced and Replaced as Needed (The Either Replaced or Re-Bedded (2023)
• New Fuel Transfer Pump (2023)

Personal items, tools, fishing tackle & gear, cockpit step box (as sentimental) and the EPIRB.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

 Engine hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.